Hitech Europe’s automatic polishers AP Series have three main features: ease of use, high flexibility and convenience (economically speaking) are all fundamental ingredients that make the AP the best choice.
It is possible to prepare 3 or 5 samples by individual pressure at the same time using the various rotating heads. The COMBO system allows to use, alternatively, the individual pressure or the central pressure.
As regard the AP series, the user can set the working wheel rotation speed (clockwise or anti-clockwise), the head speed (fixed or variable), the pneumatic pressure on the samples (regulated though a manostat) and the cycle time.
It is possible to also add the P4Kfluid dispenser at any time. It is an electronic and programmable dispenser controlled by a touch screen. This system allows the user to power the working wheel and to manage with 4 different type of abrasive supports for glanulometric composition (diamond liquids, alumina and colloidal silica). The P4K has 4 peristaltic pumps which make the working wheel using the most suitable abrasive disc according to the polishing phase. The abrasive disc is given to the Plc by the electronics, while the number and the using time of supply every minute are set thanks to the touch screen.
The P4K is completely independent of any instruments: in fact, it might be combined with all the Hitech Europe’s polishers or with any other polishing machine using an electronic device.
EP50T is the Hitech Europe’s hydraulic mounting press offered by tecmet2000. It is an automatic machine, whose operating system has high execution speed and results. The touch screen and the microprocessor allow to create complex cycles in an easy way.
The solid structure in painted stainless steel cover the hydraulic system, that doesn’t need any air open.
Hitech Europe’s EP50T hydraulic mounting press is a flexible machine: the moulds are interchangeable (have a look at the catalogue for the different types of moulds – download catalogue pdf) and the machine can produce two samples in a single cycle.
The metallographic press EP16 is a pneumatic and automatic machine. It was built for simplifying and automating the hot mounting process for the sample preparation. The operator has only to select on the digital display the appropriate mounting cycle according to the resin type which is going to be used. Preset mounting cycle parameters (temperature and timing of heating and cooling), optimised for each type of resin, are stored in the control panel, and can then be selected for starting the embedding cycle. At the end of each cycle, the cooled sample can be pulled out from the heating chamber and passed onto the polishing process.
The hot mounting technique is preferable to the cold mounting one when the sample edges have to adhere perfectly to the resin – granted by the slight shrinkage during the cooling phase. Moreover, from an economic point of view the hot mounting resin is more convenient if compared with the cold mounting resin cost.
Preset mounting cycles, starter kit of materials and accessories for mounting the first samples are included.
See the data sheet or contact us for more information.
EP50P, EP50PT and EP52PT/TWIN are the pneumatic mounting press offered by tecmet2000. They are the bigger version of the EP16. Thanks to the 2000W power, the Hitech Europe’s metallographic presses has an high productivity and they are easy-to-use. Our products’ features fulfil all the different needs of our customers as regard the metallographic sample preparation: our machine present a wide range of interchangeable moulds at competitive prices.
EP50P, EP50PT and EP52PT/TWIN are the pneumatic mounting press offered by tecmet2000. They are the bigger version of the EP16. Thanks to the 2000W power, the Hitech Europe’s metallographic presses has an high productivity and they are easy-to-use.
Our products’ features fulfil all the different needs of our customers as regard the metallographic sample preparation: our machine present a wide range of interchangeable moulds at competitive prices.
The C152C is a very easy-to-use small precision cutter.
This machine can be used with standard diamond blades or boron cubic nitride (for iron, cobalt alloys, nickel, lead and superalloys blades) and abrasive cutting wheels for cutting ferrous and non-ferrous metals.
The structure includes a touch-screen control panel to set x-axis movement and cutting wheel speed.
Solid steel structure
Compact and operational design
Start/stop and microswitch
Diamond blade max. diameter 150mm.
Cutting capacity up to 45mm.
Variable speed from 50 to 3000 r.p.m
Arm with weight for load-control
Cooling down tank provided with a valve to change the cutting oil.
The C351K Series is designed to offer an high-performance product, ensuring quality and efficiency at a competitive price.
Its new design, with the transparent and shock absorbent cover, with roll away opening system, guarantees a wide working area, making easier the cutting process, also for cutting on pieces of particular geometries.
Various models available allow to satisfy completely each type of customer needs.
The standard cutting wheel is 350 mm diameter, with cutting capacity up to 133 mm.
The left and right side port ensure the possibility to cut easily also bars of different lenghts.
